Creating Realistic Sound Fields
CONTROL
5/°/3/2 Display
STANDBY |
|
|
POWER | HOME THEATER RECEIVER |
CONTROL
SETTING | ADJUST | MEMORY |
D I G I T A L
S U R R O U N D D I G I T A L
ANALOG | L | C | R | PRO LOGIC SLEEP | TUNED ST AUTO MUTING |
LPCM | SUBWFR LFE DSP | MH | |||
DOLBY D | LS | S | RS | DGTL AUTO | KH |
DTS | INPUT ATT | VOL | |||
|
|
|
|
|
|
DVD | TV | VCR | CD | FM | AM |
INPUT | SURROUND | DSP |
ANALOG/DIGITAL | ON/OFF | MODE |
|
| MASTER VOLUME |
INPUT ATT |
|
|
ADJUST | DSP | |
MODE | ||
|
CENTER : To adjust the center speaker output level (from
REAR L : To adjust the left rear speaker output level (from
REAR R : To adjust the right rear speaker output level (from
*“0” is the initial setting for these speaker output levels.
If you have already changed the setting, another setting will be shown.
Using Theater Surround (Front Panel)
Theater Surround cannot be used with another DSP mode. Once Theater Surround is activated, the other DSP mode in use will be canceled.
When using the buttons on the front panel, no test tone is available. Make adjustments while listening to the sound of the source played back.
•You have to make this adjustment for each source.
•You cannot use Theater Surround if no rear speakers are connected.
5Press CONTROL 3(or 2) to adjust the speaker output level.
• Make adjustments so that the sound level of the selected
speaker is set at the same level as that of the front speakers.
CONTROL
ANALOG | L | C | R | PRO LOGIC |
|
LPCM | SUBWFR LFE DSP |
| |||
DOLBY D | LS | S | RS | DGTL AUTO | VOL |
DTS | INPUT ATT | ||||
1Select and play software encoded with Dolby Surround.
2Press DSP MODE repeatedly until “THEATER”
appears on the display.
The PRO LOGIC and DSP indicators light up on the display.
DSP
MODE
ANALOG L |
|
|
| R PRO LOGIC | ||
|
|
|
|
|
|
|
SUBWFR DSP
Ex.: When adjusting the center speaker output level
3
6Repeat steps 4 and 5 to adjust the other speaker levels.
Press ADJUST.
ADJUST | The CONTROL buttons now work for sound |
| |
| adjustments. |
To cancel Surround Mode
4
Press CONTROL ° (or 5) repeatedly until one of the following indications (with the current
Press SURROUND ON/OFF again so that “STEREO” appears on the display.
setting)* appears.
CONTROL
•If Surround mode is canceled while playing back multichannel digital software, all channel signals are mixed and output through the front speakers (and subwoofer if you have connected a subwoofer and set the subwoofer setting correctly – “YES.”)
ANALOG | L | C | R PRO LOGIC |
| ||
LPCM | SUBWFR LFE DSP |
| ||||
DOLBY D | LS | S | RS | DGTL AUTO |
| |
DTS | INPUT ATT |
| ||||
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VOL 
30
