Illustrations of the input/output terminals below are typical examples.
When you connect other components, refer also to their manuals since the terminal names actually printed on the rear vary among the components.
Getting Started
A
B
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL OUT
DVD
TV
•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components.
–DIGITAL 1 (coaxial): For DVD player
–DIGITAL 2 (optical): For digital TV tuner
If you connect other components, change the digital input (DIGITAL IN) terminal setting correctly. See “Setting the Digital Input Terminals” on page 10.
•Select the digital input mode correctly. See “Selecting the Analog or Digital Input Mode” on page 11.
C
AUDIO OUT | TV | |
| ||
| LEFT |
|
| RIGHT |
|
AUDIO OUT |
| |
| LEFT | DVD |
|
| |
| RIGHT |
|
FRONT/MIX |
|
|
LINE OUT |
|
|
| LEFT | CD |
|
| |
| RIGHT |
|
AUDIO |
| |
|
| LEFT |
|
| RIGHT |
OUT | IN | VCR |
|
•Connect the video input directly to the video output on the DVD player and/or VCR.
•You can also connect the digital TV tuner using the optical digital cable (see above).
•Connect the video out directly to the video input on the TV.
•To enjoy the software encoded with Dolby Digital or DTS Digital
Surround, connect the DVD player using one of the DIGITAL IN terminals (see above).
You can also connect the CD player using one of the DIGITAL IN terminals (see above).
Connect the video out directly to the video input on the TV.
7