JVC RX-E100SL 2Press DSP MODE repeatedly until “THEATER”, you want, To cancel Theater Surround

2Press DSP MODE repeatedly until “THEATER”

appears on the display.

The PRO LOGIC and DSP indicator light up on the display.

DSP MODE

ANALOG L R PRO LOGIC

SUBWFR DSP

3Press SOUND.

SOUND The 10 keys now work for sound adjustments.

4Press TEST to check the speaker output balance.

TEST

1	O LOGIC
	P
	TL AUTO

PUT ATT VOL

“TEST L” starts flashing on the display, and a test tone comes out of the speakers in the following order:

(Left front speaker)		(Center speaker)		(Right front speaker)
	(Left rear speaker)		(Right rear speaker)

Notes:

•You can adjust the speaker output levels without outputting the test tone.

•No test tone comes out of the center speaker when “CTR SP” is set to “NO.”

5Adjust the following speaker output levels (from –10 to +10).

•Make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers.

To adjust the center speaker level, press CENTER +/–.

– CENTER +

ANALOG	L	6	C	R	PRO LOGIC
5
LPCM	SUBWFR5LFE				DSP
DOLBY D	LS		S	RS	DGTL AUTO	VOL
DTS					INPUT ATT

To adjust the left rear speaker level, press REAR•L +/–.

– REAR•L +

8 ANALOG	L9	C	R	PRO LOGIC
LPCM	SUBWFRMENU		LFE	DSP
5				DGTL AUTO
DOLBY D	LS	S	RS
DTS				INPUT ATT	VOL

To adjust the right rear speaker level, press REAR•R +/–.

– REAR•R +

ANALOG0	L +10C	R	PRO LOGIC
LPCM	SUBWFRENTERLFE DSP
DOLBY D	LS S	RS	DGTL AUTO	VOL
DTS			INPUT ATT

6Press TEST again to stop the test tone.

TEST

1GIC

UTO

TT VOL

7Press EFFECT to select the DSP effect level (1 to

5) you want.

•As the number increases, the DSP effect becomes stronger (normally set it to “EFFECT 3”).

EFFECT

ANALOG	4L	5	R	PRO LOGIC
				DSP
	SUBWFR
	LS S		RS		VOL

To cancel Theater Surround

Press DSP MODE repeatedly until “STEREO” appears on the display. The PRO LOGIC and DSP indicators go off.

Creating Realistic Sound Fields

27