JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG manual

Preparation

Connecting a Monitor

To display video images from this unit, connect it to a monitor.

⬤This unit supports connections using “HDMI cable”, “component video cable”, “S-video cable”, or “video cable”.

Memo:

⬤Switch to the appropriate monitor input according to the type of connection cable used.

For details, refer to the instruction manual of the monitor.

Connecting using an HDMI cable

Connecting using an HDMI cable (sold separately) enables signals to be maintained in the digital format, and thus playback of clear video images.

Memo:

⬤To connect to a monitor that does not support the copyright protection system (HDCP), set “HDCP”.

For details, refer to “HDCP” (A page 90) .

⬤Use a High Speed HDMI Cable.

⬤After connecting using an HDMI cable, change the unit setting to “HDMI CONNECTION”.

For details, refer to “VIDEO PRIORITY MODE” (A page 88) .

Connecting using a component video cable

Connecting using a component video cable (sold separately) delivers playback images that are clearer than those by an S- video cable.

Memo:

⬤After connecting a component video cable, change the unit setting to “COMPONENT OUTPUT”.

For details, refer to “COMPONENT OUTPUT” (A page

90).

Connecting using an S-video cable

For connecting an S-video cable (sold separately).

Connecting using a video cable

Connect the output terminal of this unit to the input terminal of a TV using a video/audio cable (sold separately).

(Use a BNC adapter that is sold separately)

Note:

⬤Connect the S-video/video output of this unit directly to the TV (or monitor). Connecting this unit to the TV or monitor via a video deck triggers the copy protection function, and may cause distortion in the video images during playback.

⬤Videos that are AACS copyright-protected are not output from the S-video/video output terminals.

20