JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG 111, Component

			Others
Problem	Symptom	Action	Reference
			Page
The remote control unit	The battery of the remote control unit	Change new batteries for the remote	(A page 19)
does not work	has run out.	control.
	The remote control code of this unit	Change the “REMOTE CONTROL CODE”	(A page 19)
	and the remote control unit are	for the remote control to the same number
	different from each other.	used by this unit.
	A “LOCKED” message appears on	Disable the “mode lock” setting.	(A page 91)
	the display window of the unit.
The disc cannot be	A “LOCKED” message appears on	Disable the “tray lock” setting.	(A page 91)
ejected	the display window of the unit.
	The “READING” message does not	Pressing the [ M ] button at the front of the	-
	disappear from the unit’s display	unit for five seconds or longer opens the
	window, and the disc tray does not	disc tray. To close the disc tray after
	open when the [ M ] button is	removing the disc, press the [ A ] button,
	pressed.	and wait until the tray is closed and power
		is turned off.
		(If the disc tray does not open after
		pressing the [ M ] button for five seconds
		or longer, consult our authorized dealer.)
The disc cannot be	A disc that cannot be played on this	Confirm that the disc is playable on this	(A page 13)
played	unit is inserted.	unit.
	The region code of the BD or DVD is	Confirm that the region number is playable	(A page 13)
	different from that of this unit.	on this unit.
	An unfinalized DVD disc that is	Use that device to finalize the disc.	-
	recorded using another device is
	inserted.
Output is at “480i” (for	The component output setting may	Turn the power off, and turn it on again.	-
NTSC) or “576i” (for	be changed to “480i” (for NTSC) or
PAL) regardless of the	“576i” (for PAL) after viewing at a
component output	setting of 1080/24p using an HDMI
resolution setting	connection.
The aspect ratios of the	When two monitors are connected	When two monitors are connected	(A page 88)
HDMI output and	respectively to the HDMI output and	simultaneously, users are recommended
component output are	component output terminals of this	to set “VIDEO PRIORITY MODE” to
different	unit, the screen aspect ratio of the	“COMPONENT”.
	component output may not be
	appropriate if “VIDEO PRIORITY
	MODE” is set to “HDMI”.
Mode Conversion	Turning off the power may not start	Cancel mode conversion.	(A page 81)
cannot be performed	mode conversion even if “AFTER
although “SEAMLESS”	POWER OFF” in “SEAMLESS” is set
in the “MODE CHANGE”	and mode conversion is interrupted
menu is set to “AFTER	by the power being turned on while
POWER OFF” and the	mode conversion is in progress.
power is turned off.

111