JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG Hard Disk Drive HDD

Getting Started

⬛Do not make use of a power voltage other than that specified

⬤Doing so may result in fire or electric shock.

⬛Do not insert or remove the plug with wet hands

⬤Doing so may result in electric shock.

⬛Do not touch the plug when there is thunder or lightning

⬤Doing so may cause electric shock.

⬛Do not insert any foreign object into this unit

⬤Doing so may result in fire or electric shock.

⬛Do not dismantle or remodel this unit

⬤This unit consists of high-voltage components. Dismantling or remodeling the unit may cause fire or electric shock.

⬛Request the authorized dealer to inspect the interior part of the unit once a year

⬤Using this unit with dust accumulated inside may result in fire.

⬤It is particularly effective to perform servicing before the humid rainy season.

⬛Do not connect any video cameras that are not made by JVC to the USB terminal

⬤Doing so may result in malfunction.

Hard Disk Drive (HDD)

Hard disk drive (HDD)

The HDD rotates at a high speed whenever the power is turned “On”.

Pay particular attention to the following precautions when using this unit.

Warning

⬤Do not subject it to vibration or strong impact

Subjecting this unit to excessive impact may result in loss of recorded data and even damage of the HDD.

⬤Do not remove the power plug when this unit is running

Shutting down the power when the HDD is running may result in data loss and even damage of the HDD. Make sure that the power plug is removed only after turning off the power.

(Wait for the “GOODBYE” message on the display window to disappear first)

Formatting the HDD

To format the HDD, perform the following steps.

1Press the [MEDIA MANAGE] button on the remote control unit

2Select “FORMAT” from “HDD”

⬤A confirmation screen for formatting the HDD appears.

3Select “YES”

⬤The confirmation screen for formatting the HDD reappears.

4Select “FORMAT”

⬤ HDD formatting starts.

SD Cards

Precautions for handling SD and SDHC cards

Note:

⬤The disc operation display icon appears blinking and “READING” is displayed on the display window when the SD card is being accessed (such as during dubbing, playback, or formatting). When access to the SD card is in progress, do not remove the card or the power plug. Doing so may cause the SD card to become unusable.

If the SD card is not usable, reformat the card. If the problem persists even after reformatting, use a new SD card.

⬤Do not use or store the card at a place that is subject to static or electrical noise.

⬤Inserting the SD card incorrectly may cause this unit or the card to malfunction.

⬤Our company will not be liable for any damage or loss of the stored data due to accidents. (Be sure to back up the data.)

⬤Use the card according to the prescribed conditions. Do not use it at the following locations.

⬤Places that are exposed to direct sunlight

⬤Places near heat-generating equipment

⬤Inside a car that is under the sun with the windows tightly shut

⬤Places that are subject to high humidity and corrosion

⬤Do not bend or drop the card, or subject it to strong impact or vibration.

⬤Do not expose the card to water.

⬤Do not place near devices that emit strong magnetic or radio waves.

⬤Do not touch the metal part of the card.

⬤The SD SLOT does not support SDXC cards.

⬤To use an SDXC card, connect a SDXC-compatible USB card reader (sold separately) via USB connection.

⬤Do not format the SDXC card to the standard format of the computer OS.

⬤This unit may not recognize the SD card if a USB card reader with three or more card slots is used.

⬤Use a card reader with no more than two card slots.

Memo:

⬤To dispose a card after erasing all data inside, it is recommended that this be done using a commercially available data deletion software, or by destroying the card physically, such as with a hammer. Formatting or deletion of data using this unit only changes the file administration information, and does not erase the data completely.

11