JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG manual Batteries

Getting Started

e[ I ]

Plays the video.

f[ W ]

Pauses the video that is currently playing.

g[ o ]

Stops playback/recording.

h[MARK]

Adds a chapter mark during playback or recording. Select multiple titles from the playback navigation screen or other screens.

i[PB MODE]

Display the playback settings screen.

j[ANGLE]

Switches the camera angle for playback.

k[SET UP]

Displays the settings menu screen.

l[SUB TITLE]

Switches the playback subtitle.

m[INFORMATION CORRECT]

Displays the information editing screen.

Change batteries for the remote control

⬤If the operable distance of the remote control unit becomes shorter, this means that the batteries are running out. When this occurs, replace the batteries with new ones.

Batteries

⬤Insert the batteries correctly according to the + and – signs. Insert the – side of the battery first.

⬤If an error occurs while using the remote control unit, remove the batteries, wait for about five minutes, and operate the remote control unit again after re-inserting the batteries.

Battery life : Approximately 6 months (depending on the frequency of use)

Remote control codes

By setting a remote control code for the unit and remote control, you can prevent two recorders from operating simultaneously using the remote control for this unit.

(the setting for the unit and remote control at time of purchase is “REMOTE CONTROL 3”.)

Memo:

⬤Changing the remote control code for the remote control before the unit’s remote control code is changed will cause the unit to be inoperable.

Change the unit’s remote control code first when changing remote control codes.

⬛Changing the remote control code for the unit

1Press the [SET UP] button on the remote control to display the “SETUP” menu

2Change the “REMOTE CONTROL CODE” option in the “SETUP” menu

Memo:

⬤For details, refer to “REMOTE CONTROL CODE” (A page

83).

⬛Changing the remote control code for the remote control

1Press and hold the [OPTION] button on the remote control

2Press either of the [1], [2], [3] or [4] buttons

⬤Press the number button that is equivalent to the remote control code you desire.

3Press the [OK] button

⬤Press the [OK] button to change the remote control code.

4Release the [OPTION] button on the remote control

Memo:

⬤If the remote control code is different from the unit, the remote control code for the unit will be displayed on the display window.

Examples : REMOTE CONTROL 3

19