Digital OUT, DV in Audio Setting, BD MIX Sound

Settings Menu

⬛DIGITAL OUT

Set this item according to the device connected to the digital audio output terminal (optical digital).

⬤PCM DOWN SAMPLING

For specifying settings on sampling frequency conversion.

Setting	Description
Values

OFF	Sampling frequency is not converted.

ON	Audio recorded at a sampling frequency of
	96 kHz or 88.2 kHz is converted to 48 kHz
	and 44.1 kHz respectively.

Memo:

⬤Setting to “OFF” may produce the same effects as the “ON” mode for some discs.

⬤Dolby Digital

For setting audio output to “BITSTREAM” or “PCM”.

	Setting Values	Description

	BITSTREAM	Use this setting when connecting a
		device that is able to decode “Dolby
		Digital”.

	PCM	Audio input will be changed and output as
		“PCM”.
		Use this setting when connecting a
		device that is unable to decode “Dolby
		Digital”.

⬤	Dolby Digital Plus/TrueHD
For setting audio output to “BITSTREAM” or “PCM”.
	Setting Values	Description

	BITSTREAM	Use this setting when connecting a
		device that is able to decode “Dolby
		Digital Plus/TrueHD”.

	PCM	Audio input will be changed and output as
		“PCM”.
		Use this setting when connecting a
		device that is unable to decode “Dolby
		Digital Plus/TrueHD”.

⬤	DTS
For setting audio output to “BITSTREAM” or “PCM”.
	Setting Values	Description

	BITSTREAM	Use this setting when connecting a
		device that is able to decode “DTS”.

	PCM	Audio input will be changed and output as
		“PCM”.
		Use this setting when connecting a
		device that is unable to decode “DTS”.

⬤DTS-HD

For setting audio output to “BITSTREAM” or “PCM”.

Setting Values	Description

BITSTREAM	Use this setting when connecting a
	device that is able to decode “DTS-HD”.

PCM	Audio input will be changed and output as
	“PCM”.
	Use this setting when connecting a
	device that is unable to decode “DTS-
	HD”.

⬤ AAC

For setting audio output to “BITSTREAM” or “PCM”.

Setting Values	Description

BITSTREAM	Use this setting when connecting a
	device that is able to decode “AAC”.

PCM	Audio input will be changed and output as
	“PCM”.
	Use this setting when connecting a
	device that is unable to decode “AAC”.

Memo:

⬤Audio sound may not be properly played back if the audio equipment in use does not support “BITSTREAM” output. In this case, set to “PCM”.

For changing the audio recording settings during DV input.

Setting Values	Description

STEREO 1	Records the audio sound during video
	recording (L1, R1).

STEREO 2	Records audio sound that is added later
	(L2, R2), such as during editing.

MIX	Records “STEREO 1” and “STEREO 2”
	sounds.

For setting a mixture of BD video secondary audio and operation sounds output.

Setting	Description
Values

OFF	Outputs main audio only.

ON	Outputs a mixture of BD video secondary
	audio and operation sounds during playback
	of BD-Videos that contain BD video
	secondary audio and menu operation
	sounds.

Memo:

⬤Output is converted to Dolby Digital or DTS according to the main audio when the “DIGITAL OUT” item is set to “BITSTREAM”.