3. Press either the button or the button and select the B&W item.
4. Press either the button or the button and set to “AUTO”.
5. Upon completion of setting, press the MENU button twice.
Then, the MAIN MENU screen is brought back.
■ Set the AUX TERMINAL Item to
B&W OUT.
1. Select MODE SELECT on the MAIN MENU screen.
2. Press the SET button.
The MODE SELECT screen appears.
3. Press either the button or the button and select the AUX TERMINAL item.
4. Press either the button or the button and set to ”B&W OUT”.
5. Upon completion of setting, press the MENU button twice.
• Then, the normal screen is brought back.
MEMO
• When you use infrared illumination, if the subject excessively reflects, a B/W screen can switch to a color screen.
To perform switching with higher accuracy, we recommend that you use it by the setting mentioned in [Control by Black-White/Color Switching Signal From the Outside], referring to Page 41.
Output of Black-White/Color switching signal
It is possible to output
MENU button SET button
SET |
|
| CAMERA |
AWC | SETUP |
| |
MENU |
|
■Set the B&W Item to AUTO.
1. Select the B&W/COLOR MODE item on the ALC SETTING screen.
2. Press the SET button.
The B&W/COLOR MODE screen appears.
B&W/COLOR MODE
B&W | AUT O |
AUTO LEVEL | NORMAL |
MODE S EL E C T
CAMERA T I T L E ED I T . .
RE V ERS E MODE | OF F |
HLI MODE | OFF |
AL M . T I T L E S I Z E | D OUBLE |
AL A RM COLOUR | WH I T E |
AUX TERMINAL | (B&W IN) |
D. ZOOM MAX | x2 |
CAUTION:
When you use near infrared ray illumi- nations, use a lens that is compatible with the near infrared ray illuminations. Any lens other than the compatible one can result in
