Item |
| Functions and set values | Initial value |
|
|
| |
AUX | For setting the signal input or output of the AUX terminal. | (B&W IN) | |
TERMINAL | MOTION: | A signal is output if there is a change in the |
|
|
| ||
|
| area set on the MOTION DETECT screen. |
|
| B&W OUT: A signal is output when the camera switches |
| |
|
| to B&W or Colour mode. |
|
| B&W IN: | Set to this position when inputting the B&W/ |
|
|
| Colour switching control signal to the AUX |
|
|
| terminal. ( Page 11, 30.) |
|
| MEMO |
|
| • In setting B&W OUT, if you use an infrared illuminator in |
|
| link motion, hunting can occur. To prevent this, we |
|
| recommend that you link in motion this unit and the |
|
| infrared illuminator, etc., by control signals after setting |
|
| to B&W IN. |
|
| • If the B&W item is set to AUX, the AUX TERMINAL item |
|
| changes to [B&W IN] and can not be changed. |
|
|
|
|
D.ZOOM | This function sets the maximum zoom ratio of the | x2 |
MAX | electronic zooming. |
|
| [Set values: x1, x2, x4, x6, x8, x10] |
|
| MEMO |
|
| • The electronic zoom function can only be used by the |
|
| communication command of exclusive controllers (RM- |
|
| P2580, etc.). |
|
| • Note Picture quality deteriorates under electronic |
|
| zooming as it is accompanied by digital image |
|
| processing. |
|
| • When the electronic zoom magnification ratio is |
|
| increased, there may be blurring in the upper center left |
|
| of the screen. This is a characteristic of the main unit |
|
| and is not a malfunction. |
|
