INTRODUCTION
Features
■A DSP (Digital Signal Processor) features a Extended Dynamic Range (ExDR) and enables to shoot both bright and dark locations.
■The use of a CCD with a SENSE UP (X32) function realized the minimum luminous flux density for subject of 0.9 lx (F1.2, 50%, AGC 20dB) and 0.03 lx (at SENSE UP (X32)). Furthermore, we realized 0.03 lx (F1.2, 50% AGC 20dB) thanks to the function of B/W mode.
■A motion detector function detects the motion inside an image and emits alarm signals.
■The equipped Y/C terminals and RS-
■Day/Night surveillance
When the light is low, the camera pictures can be switched automatically to black and white pictures.
■Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.
■We do not accept liability for the loss of a recording in the case of it becoming impossible to record due to a problem in the video camera, VCR or video tape.
■We do not accept liability for any damage to the camera in cases where it is dropped because of bad installation due to failure to observe the installation instructions correctly. Please be careful when installing the camera.
■The motion detector is not a feature which prevents theft, fire, etc. Even if an accident should occur resulting in damage, we do not accept any liability.
■Electronic zoom
The 10x electronic zoom allows monitoring in far greater detail.
Characters and symbols used in this instruction manual.
CAUTION : Cautionary notes concerning operation of the unit.
MEMO | : Reference such as restrictions of features, etc. |
