
Mounting the lens
Mount the lens according to the procedures described below.
(b)F
(c)
3.
VIDEO
DC
2. |
IRIS |
VIDEO |
DC |
4. |
1. Before mounting a lens, check whether it is a
To change the mounting method, loosen the
As regards the dimension (b) of the area to which the lens is to be installed as illustrated on the left diagram, use the one with less value than what’s shown in the table below.
For both the
Lens | Flange back (c) | Dimension (b) |
|
|
|
C mount lens | 17.526mm | 5.5mm or less |
|
|
|
CS mount lens | 12.5mm | 5.5mm or less |
|
|
|
The F mark indicates a focal point.
1 | 3 | ||
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
4 | |||
2 |
| CAUTION: |
3 | Always attach the fer- |
1 | rite core (supplied) to |
| |
4 | the lens cable. |
2 | ( Page 16) |
Attached 4 pin plugs
2. Mount the lens on the camera by turning the lens clockwise. Adjust its position.
3. When using an
4. If the lens has an
If the lens cable has a different type of plug, use the
Lens | DC IRIS | VIDEO IRIS | |
Pin No. | (does not contain EE amplifier) | (contain EE amplifier) | |
1 | Brake | – | 9V [max 50mA] |
2 | Brake + | NC | |
3 | Drive | + | VIDEO |
4 | Drive | – | GND |
13
24