INTRODUCTION

Controls, Connectors and Indicators

1Lens mount

To attach the lens.

This is applicable to both C-mount lenses and CS-mount lenses.

2Back focus adjustment ring Adjusting the back focus during lens installation.

When readjustment is required, loosen the locking screw 3 by turning it counterclockwise and turn the back focus adjustment ring 2 .

After the adjustment, tighten the locking screw 3 again.

3[BF LOCK] Back focus locking screw This serves to fix the back focus-adjusting ring.

4Camera-mounting bracket

The bracket has been attached on the bottom of the camera before shipment. It can also be attached on the top according to the circumstance.

To re-attach the bracket use the threaded holes at the top, with the camera mounting bracket fixing screws 7 .

5Camera-mounting screw

hole (1/4 inch)

 

 

 

 

 

 

Use this hole when mounting

 

 

 

 

 

 

the camera onto a fixer, pan/

MAX.

tilt unit, and the like. (Use a

7mm

 

 

 

screw shorter than 7 mm.)

 

 

 

 

 

 

6Rotation-preventive hole

Make use of this rotation-preventive hole to prevent any fall when mounting the camera. Always make sure that the camera is securely mounted.

7Camera mounting bracket fixing screws (2: M2.6 6 mm)

Be sure to use a 6 mm long screw.

E-8

Page 8
Image 8
JVC TK-C1430 manual Controls, Connectors and Indicators, Lens mount, Camera-mounting screw Hole 1/4 inch