JVC VN-C11 manual Operations Setting with V.Networks Controller

Operations (Step 4 Setting with V.Networks Controller)

Starting Up V.Networks Controller

With the installed Controller, camera images can be monitored. The settings for recording, replay and frame rate etc. can also be performed.

1. Select [Start], [Programs], [V.NETWORKS] and then [V.Networks Controller] to start up [V.Networks Controller].

In the pull down menu, select the camera to connect.

Caution

After the power for VN-C11 is turned on, there will be about 20 seconds until VN-C11 becomes ready to be con- nected with the PC. This is not a de- fect.

Live images from the camera are dis- played.

Note

¥If a password has been set, enter the correct password.

¥This [Controller] can be connected to VN-C1, VN-C2, VN-C3, VN-C30 (only for JPEG), VN- A1, VN-C10 and VN-C11.

¥In the MPEG4 mode, up to 4 clients can be connected at one time. If 5 or more clients are connected, the message ÒThe VN-C11U has not start the Streaming Service.Ó appears.

25