JVC VN-C11 manual Power Monitor OUT

Preparations (Step 1 Connection and Installation)

Connecting a LAN Cable

Connect the camera to a hub or a PC by using a LAN cable.

	1	2	ISOLATED POWER ONLY			G	2	1	OUT COM
DC12V	AC24V	CLASS 2 ONLY ForUSA		For EUROPE	INPUT				OUTPUT
							ALARM
						PUSH

POWER MONITOR OUT 10BASE-T/100BASE-TX

DO NOT CONNECT TO THE

TELEPHONE NETWORK

For USA

¥For hub connection Use a straight cable.

¥For PC connection Use a cross-over cable.

Caution

There are a few types of LAN board for which a cross-over cable cannot be used. Check the specifications of the LAN board to be used before performing connection.

Note

For 100 BASE-TX, use a CAT-5 cable.

14