JVC VN-E4 manual  4-6 AV Devices,  4-7 Attaching Rack Mount Brackets,  4-8 Connection with PC

Models: VN-E4

1 55
Download 55 pages 19.26 Kb
Page 19
Image 19
4-6 AV Devices

Preparation (continued)

4-6 AV Devices

AUDIO

VIDEO INPUT

IN1CH

OUT

3CH

2CH

4CH

RS-232C

Connect up to 4 cameras to the 4 video input terminals at the rear panel of VN-E4.Output signals of each camera need not be synchronized.

Connect a microphone to the audio input terminal at the rear panel of VN-E4via amplifier. Connect a speaker to the audio output terminal at the rear panel of VN-E4via amplifier.

4-7 Attaching Rack Mount Brackets

The rack mount brackets (optional) can be used to install the unit to a rack. Request installation to the dealer of purchase.

*For details concerning the rack mount brackets, please consult the person in charge of professional equipment at your nearest JVC-authorized service agent.

In case of 1 unit. (VN-BK10rack mount bracket)

2.4-7 Attaching Rack Mount Brackets1.

POWER

LINK

100M

 

 

 

/FDCXOL

STS

ALM

 

 

 

 

 

 

 

O.L

 

 

 

 

 

 

 

AUD

CH1

 

 

 

1.

 

 

 

 

CH2

CH3

 

 

 

 

 

 

 

CH4

 

2.

In case of 2 units. (VN-BK11rack mount bracket)

2.

3.

4.

1.

 

 

3.

2.

4.

 

1. Mount the side bracket on both left and right

(Remove 1 screw from each end of VN-E4. Fasten each end using 1 M3 screw and 2 M4 screws that are supplied with the rack mount bracket.)

2. Fasten to the rack using the M5 screws supplied with the rack mount bracket

(2 M5 screws at each end)

1. Mount the joint bracket to the connecting face of the unit

(Remove 3 screws from VN-E4. Connect with 3 M3 screws that are supplied with the rack mount bracket.)

2. Fasten the 4 locations (top and bottom) using the M3 screws supplied with the rack mount bracket

(For joining the left and right units)

3. Mount the side bracket on both left and right

(Remove 1 screw from each end of VN-E4. Fasten each end using 1 M3 screw and 2 M4 screws that are supplied with the rack mount bracket.)

4. Fasten to the rack using the M5 screws supplied with the rack mount bracket

(2 M5 screws at each end)

4-8 Connection with PC

Connect the PC to the switching hub using a straight LAN cable. To operate the built-in viewer of VN-E4,set up the PC as follows. [Recommended PC Specifications for Viewing]

OS

: Windows XP Pro (SP2) or Windows XP Home (SP2)

CPU

: For receiving at 30 fps: 1.5 GHz

 

For receiving at 120 fps: 3.4 GHz

Memory

: 1 GB

Hard disk

: Free disk space of 20 MB and above

Video card

: 1024 L 768 pixels or higher, True Color (24 or 32 bits)

Sound card

: Sound Blaster (PCI)

Web browser

: Internet Explorer V6.0

19

Page 19
Image 19
JVC VN-E4 manual  4-6 AV Devices,  4-7 Attaching Rack Mount Brackets,  4-8 Connection with PC, Preparation continued