JVC VN-E4 manual
Name and Function of Parts, Introduction continued

Introduction (continued)

Name and Function of Parts

[FRONT]

A B C

D EF G H IJ KL

4 4

POWER	LINK 100M FDX	STS ALM O.L AUD CH1 CH2 CH3 CH4
	/COL

A[POWER]Lamp

Lights up when the power of VN-E4is turned on.

B[LINK]Lamp

Lights up when VN-E4is connected to the network.

C[100M]Lamp

Lights up when VN-E4is connected to the network via 100Base. The light will not be illuminated in the case of 10Base.

D[FDX/COL]Lamp

Lights up when VN-E4is connected to the network via full duplex. The light will not be illuminated in the case of half duplex. The light will appear blinking when collision occurs.

E[STS]Lamp (Status Lamp)

Lights up when VN-E4is started up properly. The light will appear blinking when troubles occur during startup and the error details will be displayed in [CH1-CH4].

CH1	CH2	CH3	CH4	Error Details
Light	Light	Light	Light	A device with the same IP
OFF	OFF	OFF	ON	address as VN-E4is
				detected. The lamps will
				not change until the power
				of VN-E4is turned off.
Light	Light	Light	Light	There is no video signal
OFF	OFF	ON	OFF	input to VN-E4.The normal
				display will be restored
				upon input of video signals.

F[ALM]Lamp (Alarm Lamp)

Displays alarm input to VN-E4.Lights up when there are changes in the alarm input or when motion is detected. The light will turn off automatically after 5 seconds.

G[O.L]Lamp (Overload Lamp)

Displays the processing load of VN-E4.This light is turned off when this unit is functioning properly. This light is turned on when the processing load of VN-E4is too heavy.

H[AUD]Lamp (Audio Lamp)

Displays the audio transmission status of VN-E4.Lights up during transmission of audio data to the network. Turns off when there is no transmission.

I[CH1]Lamp (Video 1 Channel Lamp)

Displays the image transmission status of VN-E4.Lights up during transmission of video input at [CH1] to the network. Turns off when there is no transmission.

J[CH2]Lamp (Video 2 Channel Lamp)

Displays the image transmission status of VN-E4.Lights up during transmission of video input at [CH2] to the network. Turns off when there is no transmission.

K[CH3]Lamp (Video 3 Channel Lamp)

Displays the image transmission status of VN-E4.Lights up during transmission of video input at [CH3] to the network. Turns off when there is no transmission.

L[CH4]Lamp (Video 4 Channel Lamp)

Displays the image transmission status of VN-E4.Lights up during transmission of video input at [CH4] to the network. Turns off when there is no transmission.

8