JVC VN-E4 manual Operator Password, CH1-CH4Button, Display Screen, Detection, Sensitivity, Motion

Settings (continued)

B C

A

D

E

F

G

H

The motion detect area will be displayed in blue.

A	Operator Password	The AoperatorB password is required to display current settings, or change current settings.
		Enter the AoperatorB password and press the ASetB button.
		The password is set to Avn-e4Bin the factory settings. This can be changed on the APasswordB
		page.
B	CH1-CH4Button	Select a channel for setting.
C	Display Screen	For setting whether to mask each block upon dividing the screen into 12 x 12 blocks. In factory
		settings, all blocks are masked.
		The block turns blue when it is clicked, and it means unmasked. It returns to the normal state
		upon clicking it again, and it means masked.
		Press the ASendB button to validate current changes.
D	Detection	For setting motion detect to ON/OFF. To enable the setting, press the AMask AllB or ASendB
		button.
E	Sensitivity	For setting the sensitivity of motion detect. To enable the setting, press the AMask AllB or ASendB
		button.
F	Motion	For selecting the motion speed of the object for which motion is to be detected. To detect fast
		motion, select AFastB. To detect slow motion, select ASlowB. To enable the setting, press the
		AMask AllB or ASendB button.
G	Mask All Button	Masks all blocks and enables the currentADetectionB, ASensitivityB and AMotionB settings.
H	Send Button	For enabling the current AMaskB, ADetectionB, ASensitivityB and AMotionB settings.

NOTE:

The area display serves as a reference. Ensure to perform operation check.

Ensure that multiple blocks are used to set the size of the object for motion detect.

CAUTIONS:

When a camera is connected, flicker of fluorescent lights may cause malfunction during motion detect. Changes in brightness due to auto iris or lighting may be detected as motion.

The motion detect feature is not intended to prevent theft or fire. This feature may not function properly depending on conditions of the object and settings. Our company shall not be liable for any accident or damage that occurs.

28