JVC VN-E4 manual Chattering Guard Time, Output Duration, Manual Output, Motion Detection, Window

Settings (continued)

C

D

E

F

			G
A	Chattering Guard Time	Setting when alarm input is specified as a trigger of the AAlarmB page. The minimum event
		interval can be specified for each alarm input.
B	Output Duration	For setting the output time when alarm output is specified as an action of the AAlarmB page.
C	Manual Output	For operating alarm output manually. The current output status will be displayed on the right. If
		AOutput DurationB is zero, AMakeB button sets alarm output to be Make, and ABreakB button sets
		alarm output to be Break. If AOutput DurationB is not zero, AMakeB button sets alarm output to be
		Make, and to be Break after the Output Duration. ABreakB button sets alarm output to be Break,
		and to be Make after the Output Duration.
D	Motion Detection	The window for setting the motion detect feature is displayed. For motion detect settings, there is
		no need to press the AOKB button on the AAlarm EnvironmentB page. Additionally, the motion
		detect setting window and built-in-viewer cannot be used at the same time.
E	Motion Detect Setting	The window for setting motion detect will be opened upon clicking ASetting Window...B on the
	Window	AAlarm EnvironmentB page. When the AoperatorB password is set in the motion detect setting
		window, current settings are displayed in the window.

27