JVC VN-E4 manual
5-7 Basic Page, IP Setting, IP Address, Subnet mask, Default Gateway, Host Name

Settings (continued)

5-7 Basic Page

This page is for performing basic setting related to the network.

A

B

C

D

E

F

G

H

I

J

This page can be used upon access via AadminB.

Press the AOKB button to enable the new settings upon changing. If the AOKB button is pressed upon entering an invalid value, a warning message will appear and entry will be denied. Press the ACancelB button to restore the invalid entry to the current value. When settings of the ABasicB page is changed, all services that are currently running will end immediately. For example, when changes are made to the ABasicB page during JPEG or audio distribution, distribution will be discontinued and TCP will be disconnected.

A	IP Setting	For setting the DHCP client function. Ensure to connect VN-E4to a network environment with a
		DHCP server when enabling the DHCP settings. When a DHCP server is not present, VN-E4will
		start up using 192.168.0.2/24 about 2 minutes after the launch. Refer to A3. IP Address SettingB
		for the IP address.
B	IP Address	For setting the IP address of VN-E4.
C	Subnet mask	For setting the subnet mask of VN-E4.
D	Default Gateway	For setting IPv4 default gateway of VN-E4.Default gateway of IPv6 can not be set. Set as
		0.0.0.0 when a default gateway is not set.
		Default gateway setting is required for multicast transmission. If default gateway does not exist,
		set a dummy IP address as default gateway for sending multicast.
E	Host Name	For setting the host name of VN-E4.
F	Domain Name	For setting the domain name.
G	DNS Server	For setting whether to use the DNS/DDNS server as well as the corresponding server address.
H	MAC Address	The MAC address of VN-E4is displayed in a hexadecimal number.
I	IP Version	For setting IPv6 to ON/OFF. (IPv4 is ON at all times.) When IPv6 is set to ON in a network that
		supports IPv6, the address will be displayed in the AIPv6 AddressB field. When the network does
		not support IPv6, the AIPv6 AddressB field is displayed as ADisableB.
		Changing this item restores AMTUB on the ADetailsB page to the default value of A1420B.
		VN-E4will reboot when this item is changed. Operation will be enabled after about 1 minute.
J	IPv6 Address	Displays the IPv6 address.

30