VR-N100U USERS MANUAL

Page 19 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0
2. Reboot your workstation
3. Open your web browser
4. Type http://10.10.10.10 (remember, that’s VR-N100U’s assumed IP address) in the address/location field.
NOTE: After you have finished configuring the VR-N100U and rebooting it, don’t forget to reset your workstation
back to its original IP address.
Now that you have a way of accessing the VR-N100U from your workstation, continue to Step 2: Using the VR-N100U Web
Browser.

2.4.3. Step 2: Using the VR-N100U Web Browser

From any workstation running any operating system on the same segment as VR-N10 0U, proceed to access the VR-N100U
with your web browser (http://VR-N100U_IP_Address).

Admin Name and Password

You will be challenged to authenticate your identity as the VR-N100U administrator when a password prompt
dialog appears. The default user name and password are admin and admin.

Setup Wizard

The first screen to appear is the Setup Wizard. If you already have a plan in place for your VR-N100U that
includes how you want to set the options you are seeing her e, go ahead and make your changes. This is the onl y
time you’ll ever see the Setup Wizard, unless you reset your VR-N10 0U to factory default settings on re boot.

However, if you don’t want to be distracted by having to deal with setting these options at this time, it is not a
problem. All the options you see here can easily be set and changed at any time using the utilities in the
Administration Toolbox.
If you are just not sure, you can pop ahead t o the beginning of 3. VR-N100U Overview. It describes eac h of the
options in the Setup Wizard and the impact each setting will have on the system.
1. Regardless of what you eventually decide to do here, when you have finished doing it, click on the Next
button.
2. You will be presented with the Net works Information Screen and will have three available settings o ptions to
choose from, View Network Settings, Change the Static IP Setting, or View/Change DH CP Settings.