VR-N100U USERS MANUAL

6.1.1. Processor

Due to the optimized and multi-threaded Operating System that is installed on the industrial server board, VR-N100U is able to achieve fast performance utilizing Intel Socket 370 based processors on the embedded platform. The board is designed to automatically detect and support a wide variety of these processors.

NOTE: The VR-N100U comes standard with the fastest Intel Server Processor and highest quality low-profile heat sink fan integrated onto the system.

6.1.2. Memory

The VR-N100U comes standard with 512MB of total memory.

NOTE1: The VR-N100U comes standard with the maximum memory configuration (512MB of PC133).

NOTE2: 512MB SDRAM DIMMs are NOT supported, therefore you must use two (2) 256MB SDRAM DIMMs to achieve the maximum memory capacity.

6.1.3. Onboard ATAPI

The board comes fully equipped with the multiple onboard ATAPI/IDE Channels. It is capable of supporting any ATAPI-based devices. The ATAPI device can be manually set to support any of three settings (Master, Slave or Cable Select).

VR-N100U offers onboard RAID storage, therefore four identical hard drives should be installed in the VR-N100U Rackmount System. All hard drives must be set to MASTER and utilize IDE2, IDE3, IDE4 and IDE5 Channels only.

Channel

Maximum Speed

Channel

Maximum Speed

IDE 0*

ATA/100*

IDE 4**

ATA/133

IDE 1

ATA/100

IDE 5**

ATA/133

IDE 2**

ATA/133

 

 

 

 

 

 

IDE 3**

ATA/133

 

 

 

 

 

 

NOTE1: ‘*’ IDE0 is occupied by the onboard non-volatile flash disk, thus we recommend not to attach any devices to this channel.

NOTE2: ‘**’ IDE1 is currently not used by VR-N100U and its IDE cable will not be attached to a device at this time.

NOTE3: ‘**’ IDE2 to IDE5 are used for the four (4) VR-N100U RAID hard drives.

NOTE4: We recommend that you utilize ANSI standard 40-pin 80-conducted IDE Cables for ATAPI Channels (IDE1 and above). The IDC connector MUST HAVE all 40 pins open on the (Blue) host connector.

6.1.4. Onboard SCSI

The board can come standard with an onboard SCSI Channel. The Adaptec Ultra160-LVD/SE SCSI is capable of supporting any SCSI-1, SCSI-2, SCSI-3, Narrow, Ultra, Wide, Ultra Wide, LVD160, and LVD320-based devices. The SCSI device support is dependent on the VR-N100U installed device drivers.

SCSI ID

Maximum Speed

SCSI ID

Maximum Speed

ID #0

160 MB/s

ID #8

160 MB/s

 

 

 

 

ID #1

160 MB/s

ID #9

160 MB/s

 

 

 

 

ID #2

160 MB/s

ID #10

160 MB/s

 

 

 

 

ID #3

160 MB/s

ID #11

160 MB/s

 

 

 

 

ID #4

160 MB/s

ID #12

160 MB/s

 

 

 

 

ID #5

160 MB/s

ID #13

160 MB/s

 

 

 

 

ID #6

160 MB/s

ID #14

160 MB/s

 

 

 

 

ID #7*

160 MB/s

ID #15

160 MB/s

Page 78 of 98

All Items Are Subject To Change Without Notice

Feb. 2004 Rev 1.0

Page 78
Image 78
JVC VR-N100U user manual Processor, Memory, Onboard Atapi, Onboard Scsi

VR-N100U specifications

The JVC VR-N100U is a state-of-the-art network video recorder designed to enhance the efficiency and functionality of modern surveillance systems. With its robust architecture and a suite of advanced features, this device meets the demands of both commercial and residential applications.

One of the standout features of the VR-N100U is its ability to support high-definition video recording. The device can handle resolutions up to 4K, which ensures that users receive crystal-clear footage. This is particularly beneficial for identifying details in critical incidents, enhancing overall security measures.

The VR-N100U is equipped with an intuitive user interface that makes it easy for operators to navigate through various settings and functionalities. It supports seamless integration with JVC’s line of IP cameras, allowing for a flexible and scalable surveillance solution. The NVR can manage multiple cameras simultaneously, enabling users to monitor several areas in real-time.

A key technological feature of this model is its advanced compression capabilities. The VR-N100U supports H.264 and H.265 compression formats, which optimize storage requirements without compromising video quality. This is especially advantageous in environments with limited storage capacity, as it maximizes the retention period of recorded footage.

Another critical characteristic of the JVC VR-N100U is its built-in redundancy options. It offers RAID configurations that enhance fault tolerance, ensuring that critical data remains secure even in the event of a hardware failure. This level of reliability is essential for security operations, where data integrity and availability are paramount.

Additionally, the NVR provides remote access capabilities, allowing users to view live footage and recorded content from anywhere via the internet. This feature enhances the flexibility of monitoring and allows for timely responses to potential security threats. The JVC VR-N100U is also compatible with mobile applications, offering users the convenience of managing their surveillance systems directly from their smartphones or tablets.

With PoE (Power over Ethernet) support, installation is streamlined, as the device can receive power and data through a single Ethernet cable. This eliminates the need for additional power adapters, simplifying the setup process.

In summary, the JVC VR-N100U is an excellent choice for those looking to implement a reliable and high-performance network video recording solution. Its impressive features, advanced technology, and user-friendly interface make it a valuable asset in any security system. Whether for business or home use, the VR-N100U delivers exceptional performance and peace of mind.