VR-N100U USERS MANUAL
Page 36 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0
3.5.2. Camera Views (2, 4, 8, 16)
Each user may have their own preference in regards the simultaneous viewing of network cameras. Therefore, VR-N100U
allows the user to select from a 2 camera, 4 camera, 8 camera, or maximum 16 cameras to be displayed. If the maximum
number is not selecte d, yo u c an s witch between pages to s ee the other ca meras. Below are a couple of scree n shot e xampl es
for the camera views (2 Cameras and 4 Cameras).
The frame surrounding each camera window may slightly vary because of the camera functionality (Fixed, PTZ, Motion, or
combo).
Camera Name
All cameras will display the associated name at the top. The default names will be assigned from CameraA to
CameraP which repres ent discovered cameras 1 to 16.
Camera Recording Status
All cameras will have the current status on the lower-left corner (Continuous Recording off/on, Motion Control
off/on-if supported). By clicking this button, you can toggle bet ween the various supported recor ding modes. T he
default setting will be Off on all cameras as the VR-N100U administrator will setup each camera accordingly.
The page will change and prompt you to allow you to reconfirm the chan ge in recording status.
Auto Playback
All cameras will have the Auto Playback button located on the lower-right corner. By clicking this button, the
playback window will open up and automatically display the last minute of recorded video for that camera (if
available).