JVC VR-N100U user manual LED Indicators, Status, Network

VR-N100U USERS MANUAL

6.5.3. LED Indicators

The LEDs are identified by a keyword above each light on the unit and by the complete name of the LED in the following graphic. The LED lights can flash green, amber, or red, each color indicating a different state or activity of the system. The chart below summarizes the LED indicators.

	LED Label	Color	Aspect		Description
					Power-On: Solid Red during power-on indicates a self-test. When
					the self-test is completed, the LED transitions to amber and
		Red	Solid		continues the power-on process.
					Power-Off: Solid Red during power-off indicates a safe halt, after
					which power can be safely turned off on the VR-N100U
		Amber	Solid		Power-On: Solid Amber during power-on indicates that VR-N100U
	Status				has completed the self-test and is booting the OS and application.
		Green	Solid		Indicates that VR-N100U is completely initialized. It has acquired
					and IP address and is operational.
		Amber	Flashing		Indicates that VR-N100U was unable to acquire an IP address. It
					defaults to the address 10.10.10.10.
		Green/	Blinking		Indicated that VR-N100U is reflashing the firmware.
		Amber			NEVER INTERRUPT THIS PROCESS!!!
	Network	Green	Flashing		Indicates that network traffic from an external source
	Network Activity
	(LAN1-Backbone)	Amber	Flashing	Indicates that the VR-N100U is transmitting
10/100		Amber	Solid	Your network speed is 10 Mbps.
	Network Speed	Green	Solid		Your network speed is 100 Mbps.
	(LAN1-Backbone)
		No Light			Indicates that there is no network link visible to the VR-N100U
	Drive	Green	Flashing		An IDE drive is reading or writing data.
	Drive Activity	Red	Flashing	A SCSI drive is reading or writing data.

Status

The Status LED, the first light on the left, cycles through its power-on sequence as the VR-N100U boots up. It starts out solid red during self-test. Solid amber indicates the server is booting the OS and the application. Solid green indicates the VR-N100U has successfully powered on and dynamically acquired an IP address. The Status light will remain solid green throughout normal operation. If the Status light slowly blinks amber, VR- N100U has failed to dynamically acquire an IP address. You must simply use one of the four methods outlined in the manual to manually acquire an IP address. When VR-N100U is in the process of updating or reflashing the VR-N100U firmware, the Status LED will flash quickly between green and amber. Under no circumstances should the process be cancelled or power be removed from the unit during the reflash. A partial or terminated operation may result in a dysfunctional unit.

Network

The Network Activity LED flashes green when there is network traffic from an external source on LAN1, the network backbone. When the Network LED flashes amber, it means the VR-N100U is transmitting video from the cameras and/or being accessed over the network.

NOTE: Only LAN1’s Network LED is available because the LCD Module was originally designed with the previous generation server board which utilized only a single network connection.

Page 84 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0