VR-N100U USERS MANUAL
Page 31 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0
1. Select the Yes option from the drop-down Enable Alerts list when you are ready to activate Alerts.
2. Enter the IP address of your organizatio n’s SMTP Server in the next field.
3. In the Recipient field, enter the e-mail address of each person you want to be notified when one of the selected
server events listed in the Alerts Events section occurs. Each emai l address should be delimited b y a comma, a
semicolon, or a space.
You can now choose the type of event which you want to be notified about.
4. Select the Yes option for each alert notificatio n you want the recipient(s) to receive. They include server re boots, file
system rebuilds, and overheating of the system.
5. Click on the Save button to save your choices. Click on the Send a Test Alert button to verify that the Email Alerts
were properly configured.
3.3.7. Server Reboot
The last availa ble option under the System Utilities Page i s the server Reboot System Utility. This shoul d be used whenever
possible to reboot VR-N100U. The VR-N100U offers three options as part of a graceful reboot, Safely stop the Unit for
Power off, Reset to manufacturing defaults, and a basic Reboot.
When you plan on po wering off the VR-N100 U, you m ust select the S afely stop the Unit for power off option and then press
OK. This will allow VR-N100U to power down using a managed, controlled process designed to protect the VR-N100U
equipment prior to power off. This may take a few minutes. You can check the front LCD and wait until “System Halted Power
Off” is displayed or if the Status LED is solid RED before pressing and holding the toggle power switch in the off position.
If you need to reset the VR-N100U back to its original manufacturers default settings, then select this option and press OK.
This will temporarily reset the VR-N100U back to its default setting (e.g. 10.10.10.10 IP address and admin as the
administrator name/password) after completing the reboot.
Finally, if you need to reboot the VR-N100U for any reason, do so by pressi ng the OK button.
WARNING: NEVER unplug the power from the VR-N100U, press the front recessed Reset Button, or force a power
off by holding down the power switch unless instructed by a VR-N100U authorized support personnel.
Doing so will cause a “Dirty Shutdown” which could result in damage as well as require the system to
spend a large amount of time to check and resynchronize all setting and devices before coming back
online and ready.