VR-N100U USERS MANUAL
Page 70 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0
3. Select the Browse button to open up a Choose File dialog box. Locate the VR-N100U .BIN firmware file that you
downloaded from the web site, select the file and click on the Open button. If you selected a firm ware f ile t hat is olde r
than the one currentl y installed on the selected VR-N1 00U, a warning screen will appear. Click on the Yes button to
continue.
4. After the firmware is specified, proceed to click on the Update Image button to execute the firmware reflash process.
5. Watch the Status section of the Reflas h F irm ware screen. It describes what the VR-N100U is d oing a nd where it is in
the reflash process. You can follow the process b y monitoring the Status d isplayed in the Reflash Information scree n
on your monitor, or by tracking the Status indicator light (the leftmost light) or LCD Display on the front of the VR-
N100U unit.
NOTE1: While the reflash is in progress, the Status light will flash green and amber. The buttons on the Reflash Information
screen are grayed out duri ng this process so you cannot accide ntally interrupt the reflash. It is absolutely critical that
you do nothing that will stop this process, including re moving power from the u nit. If you do, you will almost certainly
corrupt the flash memory, resulting in a dysf unctional unit.
NOTE2: The firmware reflash procedu r e will take a few minutes and during this process, the VR-N 100U will be offline.
NOTE3: You can also reflash your VR-N100U using F TP. The instructions for an FTP reflash can be found in section 6.4 Us er
FTP Client to Flash VR-N100U of this manual.