JVC VR-N900U Audio, Smart Search, 3 Select the required camera, A blue grid overlay will appear on the image, 2 Select [Show Grid] check box in the [Search Area]

You are able to click the listed events to view recordings from the required event in the view.

Note

•The Alerts list displays events occurring in the time period (approx. 1 day before and after) set in [Time navigation].

Audio

To listen to recorded audio, select the required audio source in the [Audio] section’s [Audio Sources] list.

To temporarily mute the recorded audio, select the [Mute] check box.

[Audio] section

[Browse] window

CAUTION

•The sound may become distorted when audio is played back with multiple surveillance computers.

•When returning from the [Setup] window to the [Live] window or [Browse] window, the audio settings becomes [NONE]. To listen to an audio, reselect an audio from the [Audio Sources] list.

•The audio will not be outputted at the time of still image playback and search/frame advance playback other than feed-forward x1.

•When a recorded image is played back while recording, the played back audio may break up. (Recording)

Note

•When you select an IP camera that has been set to record an audio, the specified audio will output.

•Selecting a camera not set to record an audio will output the most recently played back audio continuously.

•When the recording and recorded image is simultaneously played back, the image which is played back may pause and the sound may break up. (There is no effect to the recording in the system or the additional hard disk.)

Smart Search

Smart Search lets you specify motion in one or more selected areas of images from a particular camera. (☞Page 54)

1 Double-click the [Smart Search] bar in the [Browse] window.

[Smart Search] bar

[Browse] window

2 Select [Show Grid] check box in the [Search Area].3 Select the required camera.A blue grid overlay will appear on the image.

4 Click and drag inside the image to select the area in which you want to perform the Smart Search.

•The areas you select will become visible through the blue overlay.

•With the [Include] and [Exclude] options, you are able to toggle between including/excluding areas when you drag. With the [Invert] button, you are able to quickly invert your selection.

5 In the [Search Setup] section, select the required search sensitivity (Very Low - Very High) in the Sensitivity list.

6 Select the required image interval in the [Interval] list.

21