JVC VR-N900U Timer event name:, Specify an output, Specify a VMD event, Timer event occurs after:, Timer event is started by:, 2 Click the [Add new event] button

Specify a VMD event

1 Select the required camera to specify VMD event from the [Enabled Input Event(s)] list in the [I/O Setup] window.

2 Click the [Add new VMD event] button.

If the selected device is a multi-camera device, such as a network encoder (IP video server), a simple dialog in which you select the required camera will appear.

CAUTION

•In order to be able to use the [Add new VMD event] button, VMD events must have been defined for the network camera.

Configuring the settings for timer events

You can define a timer event under an added event.

Timer events are separate events, triggered by the input event under which they are defined. Timer events occur at the specified time lapsed after the input event under which they are defined.

1 Select the required event from the [Defined events] list in the [I/O Setup] window.

[I/O Setup] window

2 Click the [Add new event] button.

The [New Timer] window will appear.

[New Timer] window

3 Specify the required amount of time and a name for the timer event.Timer event is started by:

Read-only field, displaying the name of the event or event button under which the timer event is defined.

Timer event name:

Lets you specify a name for the timer event.

Timer event occurs after:

Lets you specify the amount of time that should pass between the event occurring/event button being clicked and the timer event. Specify the required amount of time in either seconds or minutes.

Specify an output

1 Select the required camera from the [Defined events] list in the [I/O Setup] window.

2 Click the [Add new output event] button.

The [Add New Output] window will appear.

[Add New Output] window

49