Applications

4 Select the required cameras for which the archiving function should apply.

CAUTION

•Recorded images may be lost in the recording performed while archiving.

Note

•If audio is enabled while recording, audio data from the device will also be archived.

●Fields, checkboxes and buttons Enable Archiving:

This function is not available.

Delete databases in the backup directory older than: Lets you specify how many days you want to keep archived images.

Automatic delete old archives if space is needed: This function is not available.

Send email on archive error:

Select this check box to send an e-mail alert if archiving fails.

Recording may be disrupted for at most 1 second during start of archiving.

Daily archiving times:

Lists specified archiving times. Archiving will take place every day at the specified time.

Time to add:

Specify the archiving time.

Add:

Adds the archiving time specified in the [Time to add] field to the [Daily archiving times] list.

Delete:

Removes a selected archiving time from the [Daily archiving times] list.

Select cameras for which the archiving function should apply: If the [Enable Archiving] check box is selected, this section lists cameras for which archiving is possible.

To specify that archiving should apply for a specific camera, select the check box next to the name of the required camera.

Set all:

Selects the check boxes for all cameras.

Clear all:

Clears the check boxes for all cameras.

Set all paths:

This button is enabled.

CAUTION

•When other operations (i.e. startup of Live Viewing, etc.) overlap with the startup of the archive process, up to 3 seconds of the recording may be lost.

Unit Setting

Unit Setting lets you specify account configuration, error recovery, serial port and other VR-N900U-related settings.

[Unit Setting] window

1 Select [Unit Setting] in the Main Menu.

This will open the [Unit Setting] window. You can set the following items.

[Password]

To edit the VR-N900U login password, enter the current password, then enter the new password in the [New Password] field. Enter the new password once again for confirmation purposes. Click the [Change] button to enable the settings.

Note

•To log in automatically when the VR-N900U is switched on, select the [Auto Login] check box.

[Live Viewing Auto start]

Select the [Live Viewing Auto Start] check box, live images are automatically displayed when the system is started.

[Error Report]

Lets you select how you want to be notified if an error is detected in the system. If you select [Dialog], an error message will be displayed in the window. If you select [Mail], an e-mail will be sent to the preset e-mail address to alert the abnormality.

For details on errors and measures to be taken when warning LEDs go on, refer to the instructions in “Troubleshooting” in the startup guide.

[Mail Send List]

Lets you specify the e-mail address if you selected [Mail] for the [Error Report]. To add an e-mail address, type the e-mail address in the entry field and click the [Add] button. To remove an e-mail address, select the required e-mail address in the address list and click the [Delete] button.

58