Applications

CAUTION

 

 

● SAVE changes

 

 

Inputs and selected content are configured to the system.

•

Do not change the analog camera network settings unless

 

 

 

 

absolutely necessary. If changes are unavoidable, consult

Note

 

 

your nearest JVC dealer.

•

The date and time will not be updated manually when

•

When a host name is modified, it is necessary to “Add the

 

[SAVE changes] is clicked. To update the date and time

 

Windows user” with the [User Administration] of the

 

 

 

manually, go to the [Date and Time Properties] section.

 

[Image Server Setting]. (☞Page 64)

 

 

 

 

 

• Do not set the default gateway in each of the camera

 

 

 

● CANCEL changes

 

network and intranet in the [OS Setting] window. The

 

operation may not function properly.

All inputs and selected settings are ignored.

 

 

 

 

 

 

 

 

 

● Date and Time Properties

 

 

 

 

 

 

Flash Memory Utility

To synchronize the time with the internet time server or to

 

 

 

specify the date and time manually, click [Update Now].

You can save and restore set values to the flash memory.

Automatically synchronize with an Internet server:

 

 

 

 

Select the check box to synchronize the time with the

Note

 

 

internet time server.

 

 

• Items specified in [Screen Setup], [Camera Record

CAUTION

 

 

 

 

 

Setting] and [Image Server Setting] in the Main Menu will

•

[Date and Time Properties] are not set unless the [Update

 

not be saved.

 

Now] button is clicked.

 

 

 

 

 

 

 

•

Changing the time setting may prevent normal playback of

1

 

 

 

simultaneously made recordings.

Select the [Flash Memory Utility] of the Main
Menu.

Note

•When selected, you cannot specify the date and time manually. The entries in the boxes cannot be changed.

NTP polling interval:

Specify the required time (in minutes) between each synchronization with the internet time server.

Date:

Enter the date when specifying the date manually.

Time:

Enter the time when specifying the time manually.

Time zone:

Specify the time zone.

Auto adjustment of the Daylight Saving Time:

You may setup and use the Daylight Saving Time (DST) depending on the time zone of the area you are in.

CAUTION

•Please do not set any duplicate date and time of any previous recorded data which may overlap.

Note

•If the time is synchronized with the internet time server but the specified time zone is incorrect, the system will not run at the correct time.

●Volume Properties

Adjust the volume using the slider bar.

●LOAD configuration

The preset configuration files are read and displayed on the screen.

The [Flash Memory Utility] window is displayed.

[Flash Memory Utility] window

●[Save Setting Data]

This lets you save the settings data to the flash memory.

1 Insert the flash memory into the SERIAL port on the front or rear panel.2 Select [Save Setting Data].

•You will be asked to confirm that you want to save the settings data.

•A message informing you that the flash memory cannot be detected may be displayed. If this happens, wait approximately 30 seconds, then select [Save Setting Data] again.

3 Click the [OK] button.

•The settings data will be saved.

•When saving is finished, a message informing you that the data has been saved will be displayed. Click the [OK] button again.

60