JVC VR-N900U Setting/Canceling, Operation Lock, Clock Display, Setting Operation Lock, About Performance Meter, Canceling Operation Lock, Changing monitor resolution

Clock Display

The VR-N900U has a clock display function that displays the current time on the screen.

1 Press the [2/] button while holding down the [FUNCTION] button.

Clock display appears on the screen.

Note

•To turn the clock display off, press the [2/] button again while holding down the [FUNCTION] button.

•To move the clock display position, left click and drag the clock display to the desired position.

About Performance Meter

The VR-N900U comes with a performance meter to indicate VR-N900U operating load.

At high operating loads, the system may not be able to record at the preset frame rate or operate normally.

1 Press the [1/] button while holding down the [FUNCTION] button.

A performance meter is displayed on the screen.

Load factor less than 5%	Indicated in gray
Load factor less than 60%	Indicated in Green
Load factor less than 90%	Indicated in Yellow

Load factor more than 90% Indicated in Red

Note

•The performance meter automatically displays when the VR-N900U powers up.

•To turn the performance meter off, press the [1/] button again while holding down the [FUNCTION] button.

•To move the display position of the performance meter, left click and drag it to the desired position.

CAUTION

•Do not use the recorder when the performance meter is indicated in red.

Changing monitor resolution

Press the [ZOOM OUT/CANCEL] or the [ZOOM IN/ENTER] button while holding down the [FUNCTION] button to change VGA output resolution.

CAUTION

•Selecting a resolution not supported by the monitor may prevent normal monitor synchronization.

Setting/Canceling

Operation Lock

The VR-N900U is equipped with an operation lock feature is to prevent the system from being placed into OPERATE OFF accidentally and prevent unauthorized recording operations.

Setting Operation Lock1 Press the [KEY] button while holding down the [FUNCTION] button.

Operation will be locked. The [LOCK] indicator lights up when in operation lock mode.

Canceling Operation Lock

1 (When in operation lock mode) Press the [KEY] button while holding down the [FUNCTION] button.

Operation lock will be canceled. The [LOCK] indicator will turn off.

Keypad [LOCK] indicator

[KEY] button [ZOOM IN/ENTER] button [FUNCTION] button

7