Basic Operation

Printing the Recorded Images
You may print the playback image that is displayed.

CAUTION

•This function is not available with the VR-N900U.
•This function is for the downloaded VR-N900 Viewer.
1 Double click the [Print] bar in the [Browse] window.

[Browse] window

Recording Camera Images

Recording Modes
●Recording Control Mode

In this mode, recording is carried out in accordance with the [Camera Record Setting].

The [REC CONTROL] indicator is lit.

You are able to switch the recording control mode on or off by pressing and holding the [REC CONTROL] button.

•Set online/offline periods for each camera with the [Scheduler] settings. (☞ Page 26)

•Specify the frame rate and conditions for starting recording in [Camera Settings]. (☞ Page 28)

2 Click the [Print…] button in the [Print] section. [VR-N900 Viewer Surveillance Report] window is displayed.

3 Click the [Page Setup] button in the [VR-N900U Surveillance Report] window to set the printer.

4 Click the [Print] button to start printing.
When the printing ends, click the [Close] button to close the print window.
Comments entered in [User’s Note:] are printed.

CAUTION

•The camera will not record during the offline periods specified in the [Scheduler] settings, regardless of the [Camera Settings].

•The [REC CONTROL] button is disabled when the Main Menu is displayed, when settings are being specified and during recording.

•When there is an unconnected camera, time may be required for the [REC CONTROL] indicator lamp to light up.

Note

•Press the [REC/STOP] button to cancel recording control mode and enable manual recording mode.

•Press and hold down the [REC/STOP] button to cancel all recording modes and stop recording.

•Set [Operate] to ON to automatically enter the recording control mode.
●Manual Recording Mode

Manual recording is a recording mode that executes recording from all cameras regardless of the settings in the [Camera Record Setting]. It will be recorded at the frame rate that was set in [Image Storage settings] - [Desired framerate settings] of the [Camera Settings] window.

Manual recording lets you start and stop recording from all cameras by pressing the [REC/STOP] button. Press the [REC/STOP] button to start recording and press and hold it down to end recording. Holding down the [REC/STOP] button when recording is not on will not start recording.

The [REC CONTROL] indicator is off.
●Recording by EXT REC IN Signal Mode

Recording will start from all cameras when the [EXT REC IN] terminal on the rear panel is set to MAKE state. It will be recorded at the frame rate that was set in [Image Storage settings] - [Desired framerate settings] of the [Camera Settings] window.

24