Specifying an Output Port

A specific event or the clicking of an event button can be associated with a particular output port.

To do this, specify the output port from which output will be triggered when a specific event or manual action occurs.

1 Select [I/O Control] in the [Camera Record Setting] window.

A dialog box will appear.

[I/O Control] window

2 Select the required event from the list in the left side of the window.

3 Select the required output and click the [] button located below the [Selected Outputs] list.

To remove an output from the [Selected Outputs] list, select the required output, and click the [ ] button.

Output Settings for Cameras

You are able to associate a camera with particular external outputs, defined in the [I/O Setup] window, for example the sounding of a siren or the switching on of lights.

The associated outputs can be triggered automatically when motion is detected as well as manually through output buttons.

You access the [Output Settings] window from the [Camera Settings] window (☞ Page 28), by clicking the [Outputs] button.

[Output Settings] window

●Selecting Output for Manual Control

You are able to specify outputs to be triggered manually through output button or from a list in the [Live Viewing] window.

1 Select the required output in the [All Outputs] list.

2 Click the [ ] button located between the [All Outputs] list and the [On Manual Control] list.

•This will copy the selected output to the [On Manual Control] list.

•You are able to move a selected output up or down in the [On Manual Control] list with the up and down buttons located to the right of the list.

•To remove an output from the [On Manual Control] list,

select the required output, and click the [ ] button located between the [All Outputs] list and the [On Manual Control] list.

●Selecting Output for Use on Motion Detection

You are able to select outputs to be triggered automatically when motion is detected in images from the camera.

1 Select the required output in the [All Outputs] list.

2 Click the [ ] button located between the [All Outputs] list and the [On Motion Detected] list.

•This will copy the selected output to the [On Motion Detected] list.

•To remove an output from the [On Motion Detected] list,

select the required output, and click the [ ] button located between the [All Outputs] list and the [On Motion Detected] list.

53