Applications

3 Click the [PTZ Preset Positions] button.The [PTZ Preset Positions for Device Name] window will appear.

[PTZ Preset Positions for Device Name] window

The following configuration options are available in the [PTZ Preset Positions for Device Name] window.

Set Position:

Associates the preset position selected in the list with the position specified in the [PTZ View] section.

Edit Name:Lets you edit a preset position name selected in the list.Test:

Lets you test a defined preset position. Select the required preset position in the list, then click the [Test] button. The effect is displayed instantly in the [PTZ View] section.

Delete:Lets you delete a preset position selected in the list.[C], [D]:Lets you move a preset position selected in the list up and down respectively.●[Preset Position on Events] section

You can make the PTZ camera go to particular preset positions when particular events occur.

●[Patrolling] sectionLets you configure PTZ patrolling.For details of PTZ patrolling, refer to Page 45.Defining a Preset Position
●[PTZ View] section

Lets you move the PTZ camera to the required position. You can check the position in the preview.

●[Preset Positions] sectionLets you set, delete and test a PTZ camera position.Use preset positions from device:Available only for cameras supporting this feature.

Select the check box to use preset positions defined on the camera or network encoder (IP video server). To import PTZ preset positions from a device, first delete the PTZ preset positions of the recorder. Note that by doing this you lose all PTZ preset positions in the recorder.

CAUTION

•To import PTZ preset positions from a device, first delete the PTZ preset positions of the recorder. Note that by doing this you will lose all PTZ preset positions in the recorder.

1 Display the [PTZ Preset Positions] window.

[PTZ Preset Positions for Device Name] window

Note

•In order for preset positions from the camera or network encoder (IP video server) to work with VR-N900U, the names of the preset positions must contain only the characters A-Z, a-z and 0-9, and must not contain spaces. Preset positions with names consisting of blank characters cannot be imported.

2 Move the camera to the required position in the [PTZ View] section.3 Select an undefined item from the list in the [Preset Positions] section.•The position at the top of the list corresponds to No.1 preset position.•You can define up to 50 preset positions.4 Click the [Set Position] button to define a name for the preset position.

44