To insert a disc, To remove a disc | JVC XR-D400SL manual

Playback operations

To insert a disc

1 Open the loading tray by pressing

0OPEN/CLOSE.

2 Place the disc into the loading tray.

Make sure the disc edge does not overlap the edge of the recessed area.

3 Close the loading tray by pressing

0OPEN/CLOSE.

You can check the track information by viewing the TRACK indicator.

OPEN/CLOSE

		10
		9
		8
		7
		6
	5	20
	4	19
	3	18
	2	17
	1	16
	15	1x
POWER	14	4x 2x
POWER	13	ALL
	12	1 TRACK
	11
SOURCE
		REC
	AUTO
	SCSI
REC/PLAY

English

Playback operations

Insert a disc into the loading tray for REC/PLAY.

To remove a disc

1 Open the loading tray by pressing 0OPEN/CLOSE.

2 Remove the disc from the loading tray.

3 Close the loading tray by pressing 0OPEN/CLOSE.

NOTES

•Never pull on the loading tray when it is in the open position.

•Always keep the loading tray in the closed position except when inserting or removing a disc.

•Do not insert a disc to the loading tray for SOURCE. The unit cannot play a disc that is inserted into the loading tray for SOURCE.

•When you insert an improper disc, the disc is ejected. Make sure that a disc is proper before inserting.

11

Image 15

JVC XR-D400SL To insert a disc, To remove a disc, Open the loading tray by pressing, Place the disc into the loading tray

Contents

Introduction Einleitung1 Getting started XR-D400SL Class 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Introduction Table of contents Supplied accessories Features Important cautions Safety precautions Preliminary knowledge about discs For Audio useFor Scsi use For audio recording About recordable discsCD-R disc CD-RW disc Getting started Names of parts and controlsFront panel REPEAT/SPEED indicators 14 Track indicatorPower indicator Power button Line OUT jacks L/R AC power connectorTermination switch Rear panel To connect the AC power cord Connections for audio useBefore making any connections To turn on the unit Press PowerPlayback operations Before operation Place the disc into the loading tray To insert a discTo remove a disc Open the loading tray by pressing To adjust the volume level Playing a CDTo play a CD To locate a track directly To stop playback completely or temporarilyTo advance or reverse play rapidly while playing To locate the beginning of a track To play the current track repeatedly Press Repeat repeatedly so that the ALL indicator lights upTo cancel repeat play Playing repeatedly Repeat Repeat for more programming Press Track indicatorsTo create a program Press 6while pressing To add a track To cancel program playTo cancel a track To check the programmed tracks manually About Finalize Recording operationsBefore operations Limitations of recording Speed indicator Track indicators of the tracksRecording a disc Auto REC 4x → 2x → 1x → 4x → To cancel recording during recordingPress Speed to select the recording speed Press Auto REC Recording desired tracks Program REC To record desired tracksPress Program REC To cancel program recording during recording Repeat for more programmingTo check the programmed tracks automatically Finalize indicator Finalizing a disc FinalizeAbout Finalize Erasing the recorded data Erase Connecting Using as a CD-R/RW driveConnecting and setting System configuration Setting the Scsi device ID number Host Computer With Scsi connector UnitAbout the Scsi daisy chain Turn on the host computer OperationTo use the unit as a CD-R/RW drive Press Scsi Care and handling of discs Additional information Symptom Possible case Remedy Troubleshooting OFF Number Description Remedy Track indicator Error messages General SpecificationsAudio mode Scsi mode EN. GE. FR 0400NHYUBNSAN