JVC XR-D400SL manual About the SCSI daisy chain, Setting the SCSI device ID number, English

Using as a CD-R/RW drive

About the SCSI daisy chain

English

A total of seven SCSI devices may be connected to a single host computer. Take caution to ensure that each device is set to a different SCSI device ID number. The unit is provided with a D-sub 50P half-pitched connector and has a built-in SCSI terminator. Connect the unit as the last device in the chain and set the TERMINATION switch to ON.

HOST Computer
(with SCSI connector)	The unit
	1	2	3	4	5	6	7	8	9	10
	POWER
	11	12	13	14	15	16	17	18	19	20
				SPEED		4x	2x 1x
				REPEAT		1 TRACK ALL
	SOURCE
		SCSI			AUTO REC
	REC/PLAY

Setting the SCSI device ID number
Each SCSI device connected to the host computer must be	ID
given a distinct SCSI device ID number. The unit factory
default SCSI ID number is “0,” but you may have to change	4	6		0
	5		7
this when you connect it to your computer.	3	2		1

To change the SCSI device ID number, use the ID selection switch.

Using as a CD-R/RW drive

Information

•For details of the driver software of the unit, see the instruction of the supplied CD-ROM.

•	System supported:	Windows 98 (includes 2nd edition), Windows 95,
		Windows NT 4.0
•	System requirements:	Pentium MMX 166, 64 MB RAM equivalent or
	(recommended)	higher

25