Recording a disc Auto REC, Speed indicator | JVC XR-D400SL specification

Recording operations

Recording a disc [AUTO REC]

You can record an audio CD on a CD-R or CD-RW disc from the beginning to the end of the disc by a simple operation.

SPEED indicator

1					2				3				4				5				6				7				8				9				10					OVER
POWER
11					12				13				14				15				16				17				18				19				20

SPEED	4x 2x 1x
REPEAT	1 TRACK ALL
			ERASE
		PROGRAM
	SPEED	REC	FINALIZE
	REPEAT

SPEED

SOURCE				OPEN/CLOSE

0 OPEN/CLOSE

SCSI

AUTO REC

REC/PLAY

AUTO REC

OPEN/CLOSE

0 OPEN/CLOSE

To record an audio CD from beginning to end

1 Open the loading tray by	POWER1	2	3	4	5	6	7	8	9	10OVER
pressing 0OPEN/CLOSE and	11	12	13	14	15	16	17	18	19	20
insert the audio CD that you want				SPEED		4x	2x 1x	PROGRAM
				REPEAT		1 TRACK ALL
										ERASE
to record to the disc tray for							SPEED		REC	FINALIZE
							REPEAT
	SOURCE									OPEN/CLOSE
SOURCE.
The TRACK indicators of the tracks		SCSI			AUTO REC					OPEN/CLOSE

REC/PLAY

that are contained on the audio CD are lit.

2 Open the loading tray by pressing 0OPEN/CLOSE and insert the blank CD-R or CD-RW disc into the disc tray for REC/ PLAY.

Loading tray for the source audio CD

Loading tray for the CD-R or CD-RW disc

18

Image 22

JVC XR-D400SL manual Recording a disc Auto REC, Speed indicator, Track indicators of the tracks

Contents

XR-D400SL Introduction Einleitung1 Getting started Class 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Table of contents Introduction Features Supplied accessories Safety precautions Important cautions For Audio use Preliminary knowledge about discsFor Scsi use CD-RW disc About recordable discsCD-R disc For audio recording Names of parts and controls Getting startedFront panel Power button Track indicatorPower indicator REPEAT/SPEED indicators 14 Rear panel AC power connectorTermination switch Line OUT jacks L/R Connections for audio use To connect the AC power cordBefore making any connections Before operation Press PowerPlayback operations To turn on the unit Open the loading tray by pressing To insert a discTo remove a disc Place the disc into the loading tray Playing a CD To adjust the volume levelTo play a CD To locate the beginning of a track To stop playback completely or temporarilyTo advance or reverse play rapidly while playing To locate a track directly Playing repeatedly Repeat Press Repeat repeatedly so that the ALL indicator lights upTo cancel repeat play To play the current track repeatedly Press 6while pressing Track indicatorsTo create a program Repeat for more programming Press To check the programmed tracks manually To cancel program playTo cancel a track To add a track Limitations of recording Recording operationsBefore operations About Finalize Track indicators of the tracks Speed indicatorRecording a disc Auto REC Press Auto REC To cancel recording during recordingPress Speed to select the recording speed 4x → 2x → 1x → 4x → To record desired tracks Recording desired tracks Program RECPress Program REC Repeat for more programming To cancel program recording during recordingTo check the programmed tracks automatically Finalizing a disc Finalize Finalize indicatorAbout Finalize Erasing the recorded data Erase System configuration Using as a CD-R/RW driveConnecting and setting Connecting Host Computer With Scsi connector Unit Setting the Scsi device ID numberAbout the Scsi daisy chain Press Scsi OperationTo use the unit as a CD-R/RW drive Turn on the host computer Additional information Care and handling of discs Troubleshooting Symptom Possible case Remedy OFF Error messages Number Description Remedy Track indicator Scsi mode SpecificationsAudio mode General EN. GE. FR 0400NHYUBNSAN