Using as a CD-R/RW drive, Connecting and setting | JVC XR-D400SL

Using as a CD-R/RW drive

This chapter explains the operations for using the unit as a CD-R/RW drive.

Connecting and setting

System configuration

The unit may be connected to any host computer equipped with a SCSI connector, and large amounts of data can be readily processed as desired. CD- ROM discs may be easily created using the supplied software.

1					2				3				4				5				6				7				8				9				10					OVER
POWER
11					12				13				14				15				16				17				18				19				20

SPEED	4x 2x 1x
REPEAT	1 TRACK ALL
			ERASE
		PROGRAM
	SPEED	REC	FINALIZE
	REPEAT
SOURCE			OPEN/CLOSE

SCSI	AUTO REC	When you use the unit as a
	OPEN/CLOSE
REC/PLAY
		CD-R/RW drive, use the
		loading tray for REC/PLAY.

Connecting

•When you make the SCSI connection, turn off the all equipment that you want to connect. It may damage the unit and connected equipment if you connect while power is turned on.

•When you make the SCSI connection, the SCSI cable (optional) and the SCSI card (optional) are required.

LINE

OUT

L

R

	SCSI		~ AC IN
ID	I / O	TERMINATION
56	7
34	0
2
		ON	OFF

SCSI cable

(optional)

HOST Computer

The unit

(with SCSI connector)

Connect the SCSI I/O connector of the unit and the computer with a SCSI cable.

24

Image 28

JVC XR-D400SL manual Using as a CD-R/RW drive, Connecting and setting, System configuration

Contents

XR-D400SL Introduction Einleitung1 Getting started Class 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Table of contents Introduction Features Supplied accessories Safety precautions Important cautions For Audio use Preliminary knowledge about discsFor Scsi use About recordable discs CD-R discCD-RW disc For audio recording Names of parts and controls Getting startedFront panel Track indicator Power indicatorPower button REPEAT/SPEED indicators 14 AC power connector Termination switchRear panel Line OUT jacks L/R Connections for audio use To connect the AC power cordBefore making any connections Press Power Playback operationsBefore operation To turn on the unit To insert a disc To remove a discOpen the loading tray by pressing Place the disc into the loading tray Playing a CD To adjust the volume levelTo play a CD To stop playback completely or temporarily To advance or reverse play rapidly while playingTo locate the beginning of a track To locate a track directly Press Repeat repeatedly so that the ALL indicator lights up To cancel repeat playPlaying repeatedly Repeat To play the current track repeatedly Track indicators To create a programPress 6while pressing Repeat for more programming Press To cancel program play To cancel a trackTo check the programmed tracks manually To add a track Recording operations Before operationsLimitations of recording About Finalize Track indicators of the tracks Speed indicatorRecording a disc Auto REC To cancel recording during recording Press Speed to select the recording speedPress Auto REC 4x → 2x → 1x → 4x → To record desired tracks Recording desired tracks Program RECPress Program REC Repeat for more programming To cancel program recording during recordingTo check the programmed tracks automatically Finalizing a disc Finalize Finalize indicatorAbout Finalize Erasing the recorded data Erase Using as a CD-R/RW drive Connecting and settingSystem configuration Connecting Host Computer With Scsi connector Unit Setting the Scsi device ID numberAbout the Scsi daisy chain Operation To use the unit as a CD-R/RW drivePress Scsi Turn on the host computer Additional information Care and handling of discs Troubleshooting Symptom Possible case Remedy OFF Error messages Number Description Remedy Track indicator Specifications Audio modeScsi mode General EN. GE. FR 0400NHYUBNSAN