JVC XV-N5SL manual To connect to a digital audio device, Coaxial digital cable not supplied

Getting started

To connect to a digital audio device

You can enhance the playback sound quality by connecting either of the unit’s DIGITAL OUT jacks to the digital input of an amplifier, etc. by using an optical or a coaxal digital cable (optional). The digital audio signal from a disc will be transferred directly. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder using an optional digital cable, you can enjoy high-quality surround sound.

For a digital connection, connect the unit’s DIGITAL OUT (OPTICAL or COAXIAL) to the digital input of a digital audio device using an optical or a coaxial digital cable.

When using the DIGITAL OUT (OPTICAL) jack, remove the protection cap. Do not lose the removed cap.

When the DIGITAL OUT (OPTICAL) jack is not used, replace the protection cap in the jack.

The unit

Getting started

Coaxial digital cable (not supplied)

White Red

Optical digital cable (not supplied)

Digital equipment

Audio cable (not supplied)	White	IN	IN
		LEFT	OPTICAL
		AUDIO	DIGITAL
		RIGHT	COAXIAL
	Red

NOTES

•When you make digital connection, we recommend also to make the analog connection, because, depending on discs, no signal may be output from the DIGITAL OUT.

•When you connect the unit’s DIGITAL OUT to a digital audio device, before using, set "DIGITAL AUDIO OUTPUT" in the "AUDIO" preferences correctly according to the connected audio device. If "DIGITAL AUDIO OUTPUT" is not set correctly, loud noise may be generated from speakers, causing damage to them. See "DIGITAL AUDIO OUTPUT" on page 51.

•When you connect the unit’s DIGITAL OUT to a Dolby Digital or DTS decoder (or amplifier with a built-in decoder) to enjoy surround sound, the unit’s "D. RANGE COMPRESSION" setting in the "AUDIO" preferences is invalid. Make appropriate surround audio settings on the decoder.

•If your digital audio device has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV COMPU LINK remote control system" on page 59 for details.

8