JVC XV-N5SL manual Remember to turn the volume back down

		Additional information
PICTURE
Symptom	Possible cause	Remedy
No picture is displayed on the monitor.	Connection of video cable is incorrect.	Connect the cable correctly.
	Input selection of TV is incorrect.	Select correctly.
	Disc is not playable.	Use a playable disc (see page 4).
The picture is noisy or blurred.	The unit is connected to a VCR directly and	Connect the unit so that the picture signal
	the copyguard function is activated.	flows directly to the TV.
	With some discs, the picture may be	Set "STILL MODE" to "FIELD" (see page
	blurred when "STILL MODE" is set to	51).
	"FRAME" or "AUTO."
The picture does not fit the television	MONITOR TYPE is not set correctly.	Select monitor type correctly (see page 50).
screen.
	TV settings are incorrect.	Set the television correctly.
The upper and lower parts of the	It depends on the setting on the TV.	Adjust the TV screen using the controls on
preference display are cut off when using		the TV.
wide-aspect TV.
AUDIO
Symptom	Possible cause	Remedy
No audio is reproduced.	Connection is incorrect.	Check the connection.
	Input selection of amplifier is incorrect.	Select correctly.
No audio is reproduced when playing back	Audio signal is not emitted from the unit’s	Use AUDIO OUT when playing back such
a DVD disc recorded with high sampling	DIGITAL OUT (see page 51).	discs.
frequency (88.2 kHz or more) linear PCM
audio using the DIGITAL OUT jack.
Audio volume is low when playing back	The audio level recorded on a DVD VIDEO	Turn up the volume of the TV or amplifier/
with the unit, compared with the TV or	is lower compared with a TV broadcast.	receiver.
VCR.		Remember to turn the volume back down
		before switching back to a TV broadcast to
		prevent a sudden burst of high-volume
		sound.
Sound is distorted or noise is generated.	Disc is dirty.	Wipe the disc surface (see page 5).

English

Additional information

61