JVC XV-N5SL manual Audio menu

					Changing the initial settings
Menu item		Setting options			Notes/examples
STILL MODE	•	AUTO	•	Normally, set to "AUTO."
This mode selects whether the		The unit recognizes the picture type	•	Some DVD VIDEO discs may not
content on the disc is processed by		(film or video source) of the current		play correctly if AUTO is selected. If
field or by frame. If set to AUTO,		disc.		the picture is unclear or noisy with a
the decision of how to process the				particular DVD VIDEO disc, try
	•	FIELD
content is made automatically,				changing the mode.
		Suitable for playing back a video
based on data and flags recorded
on the disc.		source disc.
	•	FRAME
		Suitable for playing back a film
		source disc.
SCREEN SAVER	•	ON
You can set the screen saver		The current picture gets dark.
function ON or OFF.
	•	OFF
See page 15 for details about the
		The screen saver function is off.
screen saver function.
MP3/JPEG	•	MP3	•	When a disc contains either only
The unit can play MP3 and JPEG		Only MP3 files can be played back if		MP3 files or only JPEG files, the unit
files recorded on a CD-R/CD-RW		a disc contains both MP3 and JPEG		can play back the files regardless of
disc. However, if a disc contains		files.		the setting.
both MP3 and JPEG files, you can
	•	JPEG
only play files of the type selected
		Only JPEG files can be played back if
in this menu item.
		a disc contains both MP3 and JPEG
		files.

English

AUDIO menu

AUDIO
DIGITAL AUDIO OUTPUT		STREAM/PCM
ANALOG DOWN MIX		STEREO
D RANGE COMPRESSION		ON
SELECT	USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER	TO EXIT, PRESS CHOICE.

This menu allows you to select desired options concerning with audio sound.

Menu item		Setting options		Notes/examples
DIGITAL AUDIO OUTPUT	•	PCM ONLY	• When playing a DVD VIDEO or
To connect the unit’s digital output to		Should be selected when you		Audio CD disc with DTS, use a DTS	Changingthe	settingsinitial
an external device equipped with a		connect the DIGITAL OUT jack of		decoder to get correct signals from
digital input, this item must be set		the unit to the linear PCM digital		your speakers.
correctly.		input of other audio equipment.	•	With some DVD VIDEO discs that
See the table following for details				are not fully copy-protected, a 20 or
	•	DOLBY DIGITAL/PCM
about the relation between the				24 bit digital signal may be output.
		Should be selected when you
setting and output signals.			•	A signal recorded with the 88.2 kHz
		connect the digital input of a Dolby		or higher sampling frequency
		Digital decoder or an amplifier with		cannot be output from the DIGITAL
		a built-in Dolby Digital decoder.		OUT jack, regardless of the setting
		When this option is selected,		(due to copy protection issues).
		playing back a disc recorded by the
		DTS or MPEG Multichannel format
		outputs a linear PCM digital signal.
	•	STREAM/PCM
		Should be selected when you
		connect the digital input of an
		amplifier with a built-in DTS, MPEG
		Multichannel or Dolby Digital
		decoder, or the stand-alone unit of
		such a decoder.

51