Setting System Parameters
For data update, move the cursor bar to "Start" and confirm by
pressing . The receiver now begins with the update and outputs different messages on the screen as required.
On completion of the update, the receiver is reinitialised and reassumes operation. The message "Download failed" appears if a problem occurs or if no signal is received.
On no account switch off the receiver during the update procedure, otherwise the entire software will be lost. The software will then have to be reinstalled in a workshop or PC and zero modem cable. The message "Please wait" flashes during the download.
After the prompt
"Show information"
an
follow precisely.
Pay attention to all
You will need to reset the clock after a software update!
You can also download the update on the Internet under the address:
Here you will find information on the procedure.
56
