Channel Selection

This section describes how you select TV channels with your receiver and how you can set the required volume.

This description of the functions assumes that the receiver has been connected correctly.

If you wish to connect the receiver yourself, please read the section "Connection and start-up" beforehand.

Selecting a TV channel

Reception status

The following information describes how to select other channels and shows what the on-screen displays look like.

After switching on the receiver, simply press the buttons in order to select other TV channels in their ascending or descending order in the channel memory.

Every time you press the button, an on-screen display shows you the selected channel together with the time, the programme start and end times as well as the channel title in the information box provided this data is transmitted together with the signal.

By pressing the button, you can leave this information box permanently displayed or switch it off by pressing the button once again.

You will receive the "Channel scrambled" message for scrambled channels.

You cannot receive these channels with the receiver UFD 570.

A further option for selecting a different channel is to press the

button. The TV channel list is now displayed. In the top right column it provides information on the network, channel, carrier number and the broadcaster. The left column shows the channel location, channel name, type of received signal (free to air/scrambled) as well as the favourites and locked channels.

21

Page 21
Image 21
Kathrein UFD 570/S manual Channel Selection, Selecting a TV channel, Reception status