5)Turn the Dial to change the value.
6)Press the EXIT button to leave the Chorus Settings menu.
7)If you wish to turn the chorus off, press the CHORUS button again.
L2 Selects the Chorus type. Use the Dial to choose one of the 4 Chorus types.
L3 Selects Chorus on/off. Use the Dial to turn the Chorus on/off for the selected Part.
L4 Selects Chorus depth. Use the Dial to change the Chorus depth for the selected Part.
L1
L 2
L 3
L 4
L 5
R 1
R 2
R 3
R 4
R 5
F 1 | F 2 | F 3 | F 4 | F 5 | F 6 | F 7 |
•The Indicator light on the CHORUS button will be lit only when Chorus is turned on for the active “Priority Part”. See “Effect Priority Guidelines” later in this chapter for an explanation of this.
•You can select from four chorus types when in the Chorus Settings menu. There is a fifth chorus type which is assigned as an Effect from the Effect Settings menu. In this way, you can actually have two chorus effects active if so desired.
Basic Controls | P. 17 |
