Kawai CP115 manual Between the Auto and Pedal

To use Punch-in recording:

1)Select Punch In/Out in the Advanced Recorder menu.

2)Use the L and R buttons to select the options and change their values using the Dial. Select AUTO with the R5 button to have the CP automatically handle the punching in/out while you play.

3)Press the REHEARSAL button (F4, F5) to listen to the song for rehearsal. If you need to adjust mixing or if you would like to loop the song, use the MIXER (F2) or LOOP ON/OFF (F6) button.

4)When you are ready to record, press the REC button and then the PLAY button. The music will start immediately from the Start Bar that you have chosen. Once the song reaches the Punch In Bar, any notes that you play on the keyboard will be recorded.

Recording will stop when the song reaches the Punch-Out Bar, but the CP will keep playing back the song to the end unless you press the STOP button.

You can repeat the punch-in/out section by turning the looping on with the F6 button.

5)Listen to what you have recorded and re-record if necessary.

L1 Selects the track to Punch in on.

L3 Selects the measure in the song from where you want the CP to start playing.

L4 Selects the measure where the CP will punch-in and start recording.

L5 Selects the measure where the CP will punch- out and stop recording.

L1

L 2

L 3

L 4

L 5

F 1 F 2 F 3 F 4 F 5 F 6 F 7

F1 Takes you to the Advanced Recorder menu.

F2 Takes you to the Mixer Settings menu. F4, F5 Plays the song for rehearsal.

F6 Turns Loop on/off.

R 1	R1	Changes the time signature.
R 2	R2	Changes the tempo.
	R3	Selects the recording mode. REPLACE
R 3		erases the previous data and records the
		new data in its place. OVERDUB mixes the
R 4		new data with the previous data so that both
		are heard together. Repeatedly pressing the
R 5		R3 button switches between the REPLACE
		and OVERDUB.
	R5	Selects the Punch-in method, Auto or Pedal.
		Repeatedly pressing the R5 button switches
		between the Auto and Pedal.

Recording a Song P. 55