Kawai EP3 manual Part Names and Functions, Volume Split Sound Selection Buttons

Page

10

3) PART NAMES AND FUNCTIONS

1 INTRODUCTION

￿VOLUME	￿SPLIT	￿SOUND SELECTION BUTTONS
The VOLUME slider controls the master volume level	The SPLIT function divides the	The SOUND SELECTION buttons are used
of the EP3 digital piano. Move the slider to the right to	keyboard into two sections - Upper	to select the sound(s) that will be heard when
increase the volume, and to the left to decrease the	and Lower - allowing each section	pressing the keys. (page 14)
volume. This slider also controls the headphone volume	to be played with a different sound.	These buttons can also be used to select
and LINE OUT output level. (page 13)	(page 19)	RECORDER songs and parts. (page 30)

￿DEMO	￿VOICING
The DEMO function introduces a	The VOICING function allows
selection of demonstration songs,	the tonal quality of the EP3
highlighting the various capabilities	digital piano to be adjusted.
of the EP3 digital piano. (page 15)	(page 27)

￿PHONES

The PHONES jacks located on the left and right side of the EP3 digital piano, are used to connect stereo headphones to the instr ument . Two pairs of headphones can be connected and used simultaneously.

￿LINE IN STEREO Jack

￿SPEAKER ON/OFF Switch

Used to turn the internal speakers on or off. (page 12)

￿MIDI IN/OUT Connectors

Used to connect the EP3 digital piano to external MIDI devices such as other electronic instruments or computers. (page 57)

￿USB Connector

Used to connect the EP3 digital piano with a personal computer to exchange MIDI data. (page 57)

￿DC IN Jack

Used to connect the included PS-154 AC power adaptor. (page 13)

Used to connect the stereo output from other electronic instruments or audio equipment such as a CD player. (page 57)

￿LINE OUT Jacks	￿DAMPER PEDAL Jack
Used to connect the audio signal to an external amplifier,	Used to connect the included F-10H single pedal to the EP3
speakers, or recording devices such as a computer. (page 57)	digital piano. (page 12)