Page

55

15) LOWER PEDAL ON/OFF

When using SPLIT mode, this function determines whether or not pressing the damper pedal will also sustain the Lower section sounds.

￿Step 1

Press and hold the TOUCH and TRANSPOSE buttons, then press the REC button.

2

Press the REC button

The LED indicators for the TOUCH, TRANSPOSE, and REC buttons will start to flash, indicating that the Lower Pedal On/Off function has been selected.

1

Press and hold both buttons

The name of the function ‘LPd’ (Lower Pedal) and the current settings will be shown in the LED display.

￿Step 2

Press the ￿or ￿VALUE/BALANCE buttons to select the desired Lower Pedal setting.

LOWER PEDAL

OffOn

When set to ‘On’, pressing the damper pedal will sustain the Lower section sounds.

When set to ‘Off’, pressing the damper pedal will not sustain the Lower section sounds.

Note that regardless of the ‘On’ or ‘Off’ setting, pressing the damper pedal will always sustain the Upper section sounds.

￿Step 3

Press the TOUCH or TRANSPOSE button to exit Lower Pedal On/Off setting mode.

The LED indicators for the TOUCH, TRANSPOSE, and REC buttons will stop flashing.

￿The Damper Effect (page 39) will be used regardless of the Lower Pedal On/Off setting.

￿Any changes made to the Lower Pedal On/Off setting will remain until the power is turned off.

￿When the power is turned off, the Lower Pedal On/Off setting will return to the default value of ‘Off’, however it is possible to use the Memory Backup function to store the preferred Lower Pedal On/Off setting. Please refer to the instructions on page 56 for more information.

FUNCTION SETTINGS

4

Page 55
Image 55
Kawai EP3 manual Lower Pedal ON/OFF