Page
38
4 | SETTINGS | |
FUNCTION | ||
|
2) TUNING
The TUNING function allows the pitch of the EP3 digital piano to be finely adjusted, and may prove useful when playing with other instruments.
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the SPLIT button.
The LED indicators for the TOUCH, TRANSPOSE, and SPLIT buttons will start to flash, indicating that the Tuning function has been selected.
2 | 1 |
Press the SPLIT button | Press and hold both buttons |
The name of the function ‘tun’ (Tuning) and a number representing the pitch for ‘A3’ in Hz (Hertz) will be shown in the LED display.
A test tuning tone will also be played.
Step 2
Press the or VALUE/BALANCE buttons to increase or decrease Tuning to the desired pitch.
TUNING
= 427.0 ~ 453.0
The tuning pitch can be set within the range from 427.0 to 453.0 Hz (displayed as ‘27.0’ and ‘53.0’).
The tuning pitch will increase or decrease in 0.5 Hz increments each time one of the VALUE/BALANCE buttons is pressed.
Step 3
Press the TOUCH or TRANSPOSE button to exit Tuning setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and SPLIT buttons will stop flashing.
While adjusting the tuning settings, the currently select sound will be heard when pressing a key on the keyboard.
To use a different sound while adjusting the tuning settings, first exit the tuning mode, select the desired sound, then repeat Step 1 and Step 2.
Any changes made to the Tuning setting will remain until the power is turned off.
When the power is turned off, the Tuning setting will return to the default value of ‘44.0’, however it is possible to use the Memory Backup function to store the preferred Tuning value. Please refer to the instructions on page 56 for more information.
