Page
37
1) BRILLIANCE
This function allows the brightness of the EP3 digital piano sound to be adjusted.
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the DEMO button.
The LED indicators for the TOUCH, TRANSPOSE, and DEMO buttons will start to flash, indicating that the Brilliance function has been selected.
2 | 1 |
Press the DEMO button | Press and hold both buttons |
The name of the function ‘bri’ (Brilliance) and the current settings will be shown in the LED display.
Step 2
Press the or VALUE/BALANCE buttons to increase or decrease the Brilliance level to the desired value.
BRILLIANCE
The Brilliance value can be set within the range of
Positive values produce a brighter tone, while negative values produce a more mellowed tone.
Step 3
Press the TOUCH or TRANSPOSE button to exit Brilliance setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and DEMO buttons will stop flashing.
Any changes made to the Brilliance setting will remain until the power is turned off.
When the power is turned off, the Brilliance setting will return to the default value of ‘0’, however it is possible to use the Memory Backup function to store the preferred Brilliance value. Please refer to the instructions on page 56 for more information.
FUNCTION SETTINGS
4
