Page
44
7) DAMPER HOLD ON/OFF
This function determines whether or not pressing the damper pedal will sustain continuous sounds such as organ or strings after the keys are released.
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the STRINGS/CHOIR button.
4 | SETTINGS | |
FUNCTION | ||
|
|
| The LED indicators for the TOUCH, TRANSPOSE, and STRINGS/CHOIR |
|
| buttons will start to flash, indicating that the Damper Hold On/Off function has |
2 | 1 | been selected. |
Press the STRINGS/CHOIR button | Press and hold both buttons | |
The name of the function ‘dMP’ (Damper Hold) and the current settings will be shown in the LED display.
Step 2
Press the or VALUE/BALANCE buttons to select the desired Damper Hold setting.
DAMPER HOLD
OffOn
When set to ‘On’, pressing the damper pedal will sustain sounds after the keys are released. When set to ‘Off’, pressing the damper pedal will not sustain sounds after the keys are released.
Step 3
Press the TOUCH or TRANSPOSE button to exit Damper Hold On/Off setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and STRINGS/CHOIR buttons will stop flashing.
Any changes made to the Damper Hold On/Off setting will remain until the power is turned off.
When the power is turned off, the Damper Hold On/Off setting will return to the default value of ‘Off’, however it is possible to use the Memory Backup function to store the preferred Damper Hold On/Off setting. Please refer to the instructions on page 56 for more information.
